My mother got me a flip for Christmas so I could do videos for my blog. Here it is 6 months later and I'm still not sure how to do it. I thought it was time to give it a try though, so here is my first attempt at a video tutorial. This is to make those cute little rolling roses, similar to the sizzix one, although I spaced my curves a bit different so the center drops in. The SVG will be down below if its not already. If you can't see the video, please check back, I'm electronically challenged and this might take a few tries to work out.....
Great Tutorial, I was looking for the die to make this flower and now thanks to you, I have it for the CRICUT!!!!! You have wonderful SVG files. Thank you for all your hard work. Cheryl
fantastic!! Thanks so much for sharing. After I downloaded this I went through the rest of your site and found all kinds of goodies. Thank you so much.
I laughed about your boys. My kids are the same way 'cept there always seems to be an "emergency" when I'm on the phone
Could you tell me what I need to do to open the video tutorial? There is no place for me to click to open it. I really want to see how this is done. Please help???
There is no arrow in the middle. There are other sites with videos which I cannot access either. Any suggestions? Is there something that is blocking it? I want to learn to make these roses....I love them!
Hi I've downloaded the file and when i cut it in scal it cuts perfect right to the end but then it cuts a line right through the centre of it. Any ideas what i'm doing wrong......LOve the idea and really want to make one. thanks
Thank you SO much for the SVG file!! I wanted to try making these flowers but just couldn't figure out how to design it - you saved me hours of trying!!
I really like your blog and have been following it for a few weeks now. I especially like this rolling rose video and have downloaded the file.......thank you for that! NO.........REALLLLLLLLY.............THANK YOU! I have been making these left and right in all different colors!! Seriously though, I am thrilled that I don't have to cut them out by hand!
i've been looking for this!!! thank you for making it, but for some reason, it won't let me download the svg--it pops up a message saying that it is set to private. help please?
Thanks for the video as well as the svg! However like a few of the others when I cut it it doesn't cut it one piece - it draws a line straight to the center resulting in 3 pieces :( Any idea what I'm doing wrong? I see that many people have had success in making it so clearly there's something wrong in my setup but I can't figure out what :(
Wow! These are gorgeous! I just got a Cricut and SCAL software & was looking for something just like this to use on home decor stuff. The file says set to private. Any chance you would repost? Thanks !
Beautiful. What a easy way to make the roses. I tried to download the file however file states set to private. Could you please tell me where I can get the file.
Thanks in advance Dusti dusti@scrappinwithcricut.com
I also have the same problem when I cut with the SCAL, the cricut is cutting a like in the middle and my flower comes out in pieces :( any suggestions?
50 comments:
this is great! I have been cutting mine by hand...can't wait to use this!
This is great. I have been wanting to make some of these and didn't want to cut them my had. Thanks so much.
This is very cool, I have never seen these, you don't happen to have a .cut file for this do you?
Thanks, Scrapiegirl75@yahoo.com
I was thinking.....now you have started it....you'll have to make the different styles of flowers!
Brilliant video! love the rose and thanks for the file - have a great weekend to you and the family.
Lin
Uk
For some reason, the file will not download for me. Any suggestions?
For some reason, I can't download the file. I tried using both Internet Explorer and Firefox. It just keeps bringing me back to the download page.
Thank you! I have been cutting mine by hand and thank you for the cut file. Love your blog.
SallyW
Oh I cant wait to try this. I have been wanting to make one of these with the straighter edges..maybe you will make one of those too! Lovely!
Great Tutorial, I was looking for the die to make this flower and now thanks to you, I have it for the CRICUT!!!!! You have wonderful SVG files. Thank you for all your hard work. Cheryl
Great Tutorial - only problem that I am having is that it doesn't cut in one piece but in three. Otherwise it's a great idea. Thanks
Thank you for this file...I cut 5 of them last night...I think it might be my newest addiction. ;)
nice job!
Thank you for the great tutorial and svg. I must must try that :-)
Sari
I just made one! Off to cut more! I love this!!
Thanks!!
Mindy
Love the file, I cut one as soon as I downloaded the file and it is adorable. I love the scalloped edges.
Oh thank you!!! I love it!!
Thank you so much for sharing! Love it.
carmen
Thanks so much for the great tutorial. Love the rose file and will use it OFTEN. :)
Thank you so much for sharing your SVG file!! I love your blog and became a follower!!
Wow! I am so impressed at how easy that was! I thought it was going to be really involved. I'll definately have to try this!
fantastic!! Thanks so much for sharing. After I downloaded this I went through the rest of your site and found all kinds of goodies. Thank you so much.
I laughed about your boys. My kids are the same way 'cept there always seems to be an "emergency" when I'm on the phone
Could you tell me what I need to do to open the video tutorial? There is no place for me to click to open it. I really want to see how this is done. Please help???
to view tutorial you click the play button (arrow)on the middle of the screen.
There is no arrow in the middle. There are other sites with videos which I cannot access either. Any suggestions? Is there something that is blocking it? I want to learn to make these roses....I love them!
Thank you so much for the video and svg. I have just made some and they are awesome!!!! Great job. Thanks Toni
Hi I've downloaded the file and when i cut it in scal it cuts perfect right to the end but then it cuts a line right through the centre of it. Any ideas what i'm doing wrong......LOve the idea and really want to make one.
thanks
Gorgeous flowers!! Thanks for sharing the SVG file!!
Thank you SO much for the SVG file!! I wanted to try making these flowers but just couldn't figure out how to design it - you saved me hours of trying!!
thank you for the tutorial...it will definitely be put to the test at my house...haha...thanks again
Will be trying this tomorrow! Thanks for tutorial.
Thanks so much for the file and great tutorial. Can't wait to try it.
Super cute and super simple! TFS!
I really like your blog and have been following it for a few weeks now. I especially like this rolling rose video and have downloaded the file.......thank you for that! NO.........REALLLLLLLLY.............THANK YOU! I have been making these left and right in all different colors!! Seriously though, I am thrilled that I don't have to cut them out by hand!
Jeanne in Boston
Gorgeous rose thank you so much for sharing the file!
Juliex
Thanks so much for the 3d rose file! I knew osmeone had to have made a n SVG for it, and luckily I found your blog. I am adding you to my blog roll!
Same here - been looking for a cutting file for this for ages but at the end it cuts a line across & doesn't work. :(
I cut thid file but there is a cut right thru it cutting it in to 3 different rose circle. Can you help?
i've been looking for this!!! thank you for making it, but for some reason, it won't let me download the svg--it pops up a message saying that it is set to private. help please?
Great! I would love to make some of these but I'm with the others and can't get it to even download....Help!?
Thanks for this file! I'm sure it'll get a lot of use from me (i'm really on a paper flower kick lately)
Thanks for the SVG! I have a die for this, but love a SVG for those times when you want to change the scale or mass produce! Thanks!
Thanks for the video as well as the svg! However like a few of the others when I cut it it doesn't cut it one piece - it draws a line straight to the center resulting in 3 pieces :( Any idea what I'm doing wrong? I see that many people have had success in making it so clearly there's something wrong in my setup but I can't figure out what :(
Your flowers are beautiful and your tutorial is excellent. I tried to download the .svg file for the rolling rose and it says it's set to private.
Am I doing something wrong? I would really like to make some of these.
Thanks!
Wendy
Hi - I, too, tried to download your beautiful rose. The file is marked private. Are we too late?
Thanks,
Anne
Wow! These are gorgeous! I just got a Cricut and SCAL software & was looking for something just like this to use on home decor stuff.
The file says set to private. Any chance you would repost? Thanks !
When I click to download the file want download. Could you email it to me?
lisa@midnightcall.com
Beautiful. What a easy way to make the roses. I tried to download the file however file states set to private. Could you please tell me where I can get the file.
Thanks in advance
Dusti
dusti@scrappinwithcricut.com
Hi I love this rose so much but when I went to download it says private please help.
Thanks
Fi xx
sewell.fiona at yahoo.com
Beautiful flower, thanks for sharing.
I also have the same problem when I cut with the SCAL, the cricut is cutting a like in the middle and my flower comes out in pieces :( any suggestions?
Please email me mianux724@yahoo.com
Post a Comment